Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Do you want to replace just the blade, or the whole thing? Each is held on by one of two pins. I've never tried it, but I imagine all you have to do is tap out the pin (left-to-right) with the appropriate sized punch.
It is pretty straight forward. There is a pin that holds the blade in and another which holds the base on the barrel. To remove the blade use a pin punch and remove the blade pin then pull blade up/out. To remove the base use a pin punch and drive out the base pin. The base is keyed to the barrel. Once the pin is removed using a hammer and block of wood or something like that so as not to damage the base, drive the base off the barrel. Then remove key from key seat in barrel. Hope this helped.
It is pretty straight forward. There is a pin that holds the blade in and another which holds the base on the barrel. To remove the blade use a pin punch and remove the blade pin then pull blade up/out. To remove the base use a pin punch and drive out the base pin. The base is keyed to the barrel. Once the pin is removed using a hammer and block of wood or something like that so as not to damage the base, drive the base off the barrel. Then remove key from key seat in barrel. Hope this helped.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.