spankaveli
Member
facts:
problem did not exist before bolt disassembly
problem occurs when aftermarket bolt handle & lift kit is installed
problem still occurs when factory bolt is reinstalled & lift kit is removed.
symptoms:
the trigger does not release the firing pin. the safety is functional in all 3 positions, and in the fire position the trigger moves as i can remove the bolt fine by normal procedure (pressing down the cocking indicatior & pressing the trigger), but when i reinstall the bolt and the gun is on fire, nothing occurs whenever i pull the trigger. the trigger DOES move, as stated before. trigger does not move in either of the other 2 safety positions. both baffles are positioned correctly as the bolt does go into the gun all the way. i also manually cocked the bolt before reinstalling it obviously since it goes in. i'm a novice when it comes to this and out of ideas. i've removed the stock and adjusted the trigger all the way both ways to no avail.
any suggestions? Sad
problem did not exist before bolt disassembly
problem occurs when aftermarket bolt handle & lift kit is installed
problem still occurs when factory bolt is reinstalled & lift kit is removed.
symptoms:
the trigger does not release the firing pin. the safety is functional in all 3 positions, and in the fire position the trigger moves as i can remove the bolt fine by normal procedure (pressing down the cocking indicatior & pressing the trigger), but when i reinstall the bolt and the gun is on fire, nothing occurs whenever i pull the trigger. the trigger DOES move, as stated before. trigger does not move in either of the other 2 safety positions. both baffles are positioned correctly as the bolt does go into the gun all the way. i also manually cocked the bolt before reinstalling it obviously since it goes in. i'm a novice when it comes to this and out of ideas. i've removed the stock and adjusted the trigger all the way both ways to no avail.
any suggestions? Sad
