Spring1898
Member
- Joined
- Oct 30, 2010
- Messages
- 35
So I took ownership of a couple pounds of Leverevolution powder for my 30 30, 32 WS, and 35 Remington.
The only 32 WS load data I could find comes from Hornady where the same charges are listed for the FTX and the traditional FN, the former of which seats much further into the case than the latter.
I also noticed something interesting.
Speer's load data underloads Leverevolution by about 1 gr in the 30 30 putting alliant's Power Pro on top by a good margin. Are Alliant and Speer are part of the same company?
For 32 WS, They don't have a load for Leverevolution, but the Power Pro max load is 4.5gr higher than 30 30, and they claim it is pushing the 170gr bullet at 2400fps. That seems like a lot. I wish they listed the pressure
The Hornady Leverevolution load for 32 WS maxes at 38.5 or about 2gr higher than 30 30.
So what loads are you using for Leverevolution 32 WS, and what velocities have you seen at those loads?
The only 32 WS load data I could find comes from Hornady where the same charges are listed for the FTX and the traditional FN, the former of which seats much further into the case than the latter.
I also noticed something interesting.
Speer's load data underloads Leverevolution by about 1 gr in the 30 30 putting alliant's Power Pro on top by a good margin. Are Alliant and Speer are part of the same company?
For 32 WS, They don't have a load for Leverevolution, but the Power Pro max load is 4.5gr higher than 30 30, and they claim it is pushing the 170gr bullet at 2400fps. That seems like a lot. I wish they listed the pressure
The Hornady Leverevolution load for 32 WS maxes at 38.5 or about 2gr higher than 30 30.
So what loads are you using for Leverevolution 32 WS, and what velocities have you seen at those loads?