Hey everyone. This is my first post to the handloading section and I just thought that I would share some load data that I have gotten for the .32NAA cartridge. Please note that the 'gun' used to fire these rounds was actually a locked-breach test barrel with 2.75" overall length, so YMMV some...
COL = 0.970"
Hornady 60 grain XTP bullet with N310 powder
2.8 grain : WSPP = 1093 ft/sec, CCISPP = NA
2.9 grain : WSPP = 1042 ft/sec, CCISPP = 1079 ft/sec
3.0 grain : WSPP = 1116 ft/sec, CCISPP = 1115 ft/sec
3.1 grain : WSPP = 1126 ft/sec, CCISPP = NA
3.2 grain : WSPP = 1197 ft/sec, CCISPP = NA
No overpressure signs were observed
Speer 60 grain Gold Dot JHP with N310 powder
2.8 grain : CCISPP = 1068 ft/sec
2.9 grain : CCISPP = 1094 ft/sec
3.0 grain : CCISPP = 1142 ft/sec
Testing was halted due to lack of ammunition. No overpressure signs observed.
COL = 0.970"
Hornady 60 grain XTP bullet with N310 powder
2.8 grain : WSPP = 1093 ft/sec, CCISPP = NA
2.9 grain : WSPP = 1042 ft/sec, CCISPP = 1079 ft/sec
3.0 grain : WSPP = 1116 ft/sec, CCISPP = 1115 ft/sec
3.1 grain : WSPP = 1126 ft/sec, CCISPP = NA
3.2 grain : WSPP = 1197 ft/sec, CCISPP = NA
No overpressure signs were observed
Speer 60 grain Gold Dot JHP with N310 powder
2.8 grain : CCISPP = 1068 ft/sec
2.9 grain : CCISPP = 1094 ft/sec
3.0 grain : CCISPP = 1142 ft/sec
Testing was halted due to lack of ammunition. No overpressure signs observed.