Went out today and verified a few loads and tossed in a couple new ones.
One of my range compardre's has a 255 grain Keith mold and he gave me 10 255gr (on my digital scale) Keith style semi-wadcutters. He lubed them with some sort of yellow-gold looking lube... No smoke.....
Oct 28, 2012 tests: 15 yards at 32 degrees.
240 grain LSWC,
Star-Line Brass, WLP, 1.487 COL Roll Crimp
6.1 grains HP-38 = 785 fps with a 0.75 inch group with one flyer to 1.25
6.2 grains HP-38 = 800 fps and a 1.25 inch group
6.3 grains HP-38 = 793 fps with a 1.50 inch group
5.4 grains TiteGroup = 780 fps and a 4.0 inch group
255 grain Keith Semi wadcutter
Star-Line Brass, WLP, 1.586 COL, Roll Crimp
6.0 grains HP-38 = 732 fps and a 0.40 inch group with one flyer to 0.75 inch
200 grain Hornady XTP JHPStar-Line Brass, WLP, 1.487 COL Roll Crimp
7.1 grains HP-38 = 830 fps and a 1.25 inch group
207 grain Lead Semi-wadcutter hollow point w/ gas-checkStar-Line Brass, WLP, 1.497 COL Roll Crimp
6.2 grains TiteGroup = 870 fps and a 0.75 inch group, very clean
6.3 grains TiteGroup = 887 fps and a 4.0 inch group
7.0 grains HP-38 = 855 fps, and a 0.75 inch group,
7.1 grains HP-38 = 865 fps and a 1.5 inch group
7.2 grains HP-38 = 895 fps and a 2.0 inch group,
7.3 grains HP-38 = 910 fps and a 1.0 inch group