Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

.458 SOCOM Dies; Group Buy

Discussion in 'Rifle Country' started by 444, Jun 2, 2003.

Thread Status:
Not open for further replies.
  1. 444

    444 Member

    Joined:
    Dec 26, 2002
    Messages:
    7,977
    Location:
    Ohio
    For anyone that might have an AR15 upper chambered for .458 Socom, we are putting together a group buy on Dies.


    We previously had a group buy on uppers, brass, and dies. However the dies we ended up getting proved to be unsatisfactory. A good friend of mine, Pahrumpcaveman, has put this together with the help of Marty at http://www.teppojutsu.com/ who provided the drawings and specs on the cartridge.
    The dies are going to be manufactured by Lee. The setup is going to include a sizing die, an expander die, a bullet seating die, two bullet seating stems, a factory crimp die, and a shellholder. If we can get 25 sets sold, the cost is going to be $42 plus shipping. Mike (Pahrumpcaveman) is going to be handling the whole affair. His E-Mail address is caveman@teknett.com

    Here is a link to the related thread on AR15.com
    http://www.ar15.com/forums/topic.html?b=3&f=118&t=157701

    Here are a couple links for info on the .458 Socom Cartridge:
    http://www.teppojutsu.com/
    http://www.mylittlespark.com/ar15/458Socom.html
    http://www.sskindustries.com/atlantis/ar15.html
    http://www.ar15.com/forums/topic.html?b=3&f=118&t=142408

    We want to get moving on this ASAP. If you want a set of dies, please contact Mike ASAP. Mike is not making anything on this, he just stepped up to the plate to fill a void for those of us who own the uppers and need a good set of dies. This will take some work on his part which he is doing voluntarily.
     
Thread Status:
Not open for further replies.

Share This Page