Talking to a guy tonight that has one of these that has only been shot 5 times whats a good price for both of us?It's in great shape w/ only the very slightist hint of a turn line.Obviously I'd like to get it as cheap as possible but don't want to take advantage of him either.Anyone know the book price....Trade in?Thanks,Red
60's Colt 357 Python price check
- Thread starter redwood
- Start date
- Status
dfariswheel
Member
- Joined
- Dec 26, 2002
- Messages
- 6,656
1960's Pythons in really good condition are bringing anything from $800 to $1200 and sometimes more.
Condition is everything, and having the original wood grips and the box puts them on the high side of the range.
Problem is, the prices of Pythons is skyrocketing, and the prices brought by earlier models varies wildly from high to sky high.
Condition is everything, and having the original wood grips and the box puts them on the high side of the range.
Problem is, the prices of Pythons is skyrocketing, and the prices brought by earlier models varies wildly from high to sky high.
Black Knight
Member
I just bought a 4 inch Python made in 1978 for $800 out the door. It has alot of rounds through it and needs a complete cleaning bad but seems mechanicly fine. The bluing shows a bit of holster wear and the grips are original and show quite a bit of wear. With the exception of a trigger shoe it apears to have been a gun that saw daily use in the holster of a cop or armed security officer. Pythons run the gambit, anywhere from $500 - $1500.
This is my second Python and is the "little brother" of my 6 incher (both made in 1978 according to Colt). Wish I had a digital camera and knew how to post pictures.
This is my second Python and is the "little brother" of my 6 incher (both made in 1978 according to Colt). Wish I had a digital camera and knew how to post pictures.
Standing Wolf
Member in memoriam
It's probably worth at least double that, and in some parts of the country, triple. There are very few Python bargains any more.
XavierBreath
Member
What is the barrel length and finish on this Python? It make a big difference.
A standard 4 inch blue Python will sell pretty quickly at $700. If you wait, you can get more. Prices are all over the place since colt quit making DA revolvers.
A standard 4 inch blue Python will sell pretty quickly at $700. If you wait, you can get more. Prices are all over the place since colt quit making DA revolvers.
Xavier this particular piece has a 6" barrell and almost flawless blue finish with just the slightest hint of a turn ring.Darnit I'd want it as a shooter not a collector piece which it sounds more like according to what I'm hearing,I guess if he prices it right this weekend I could get it and try to trade for a shooter 1911.Thanks for all the input,Red
XavierBreath
Member
Excellent point Jeff......
Yeaowwwww.... what !!!!:banghead:
All of this you're putting us through and your going to take the Revolver of Revolvers in which they announced they will no longer make ever again, and you're going to trade it away for a 1911. The one wheelgun most collectors would love to have at least one of, especially in a collectors condition.
You're a bottom feeder guy ????
You're going to trade for a bottom feeder in which every one and their grandma makes ?
What's the purpose of buying it and giving him fair market value if you want to trade it away ?
It sounded like you personally wanted the gun.
I'm confused.
Don't get me wrong, the 1911 is a fine gun and I own my share, but to get one of the most coveted modern day wheel guns at a or fair market price to trade it away is just..... well.... I'm not going to say it.
At this time there are hundreds of people paying through the nose so that they can have one socked away.
The prices are even getting stupid on Pythons.
Here's a few examples....
http://gunbroker.com/Auction/ViewItem.asp?Item=62966908
http://gunbroker.com/Auction/ViewItem.asp?Item=62179410
http://gunbroker.com/Auction/ViewItem.asp?Item=62539033
Good luck in whatever you decide.
This confusion hurts my little brain.
Jeff (GUNKWAZY)
ScottsGT
Member
Man, you stink! I'm saving like a mad hatter to buy a 6" Python, and you are handed a deal of a lifetime! 
I'm wanting to get a Nickel plated version though. I'm just attracted to shiney things. If you do get it, stay away from 357 mag. loads. They will eventually wear out the action and tuning of the Python since it is such a fine working piece.
I'm wanting to get a Nickel plated version though. I'm just attracted to shiney things. If you do get it, stay away from 357 mag. loads. They will eventually wear out the action and tuning of the Python since it is such a fine working piece.Mr. Beretta
Member
If you want to go nuts. The price of factory nickel Pythons are higher than the space station. Ah....I should have keep mine..............Oh well.........:banghead:
ScottsGT
Member
Well, I've seen one. Lot of play in the action and cylinder. Just felt worn out and the guy that was selling it told me he bought it new and said all he ever shot was .357 and he regretted it.
Robo_Railer
Member
- Joined
- Nov 14, 2006
- Messages
- 271
I'll bet I've run way more .38 wadcutters and SWC through mine than .357 loads, and it's occasionally out of time on one chamber. Haven't fired it in years, but since it might become my duty gun once again, it's going back to "CMC" for "TLC." It'll turn 40 years old this year.
When I get it back, I'll probably be pumping a bunch more practice ammo through it, just not a steady diet of "serious boomflash" stuff.
When I get it back, I'll probably be pumping a bunch more practice ammo through it, just not a steady diet of "serious boomflash" stuff.
Prices do vary greatly you all will love this one! I have a 4 inch Python that is 99.5 percent condition that was bought several years ago by my father when Otasco was going out of bussiness here. The original price said 750.00on the tag( which I still got) my father gave a whopping 300.00 out the door. He finally gave it to me this winter and I have it and the original box. The gun has been fired less than 50 times and has no sign of wear. It is kept in my vault and someday will be given to my son. I was offered 1500.00 for mine sight unseen if the condition was what I stated. He looked at it and I told him it was not for sale and he offered 2000.00 for it. If I could buy it for 700.00 I would be laughing all the way out the door.
GeezerwithGuns
Member
Heck, if you can get it for $350 - Do it. I'll give you $700 for it and you can go and buy your 1911 shooter. 
Sniper X
Member
Just got mine today!
Yesterday was my birthday, but I got my present from myself today! I picked up my 6in Python from the freind who sold it to me today. Originally he wanted 500.00 for it but gave it to me for $400.00. It is in real good condition finish wise, and perfect mechanically. It does not have the stock stocks, but does have What look like factory pacmeyers with the gold colt sheild on both sides. I took some pictures today but wont be able to digitize them till Monday.....I lucked out big tiime as I never had a Python, just a Diamondback...but it was very sweet.
Yesterday was my birthday, but I got my present from myself today! I picked up my 6in Python from the freind who sold it to me today. Originally he wanted 500.00 for it but gave it to me for $400.00. It is in real good condition finish wise, and perfect mechanically. It does not have the stock stocks, but does have What look like factory pacmeyers with the gold colt sheild on both sides. I took some pictures today but wont be able to digitize them till Monday.....I lucked out big tiime as I never had a Python, just a Diamondback...but it was very sweet.
Ala Dan
Member in memoriam
If it is in the condition you describe, $895 is 'bout the starting point for a
LNIB 60's model Colt Python here in Old Dixie'Land.
LNIB 60's model Colt Python here in Old Dixie'Land.
No shortage of opinions when the Python is the topic.
1. Why are they so expensive?
"Because they should be," -Jeff Cooper
2. They break or wear out.
The Colt lockwork is less sturdy than the S&W design. But it's not weak. What usually happens is the the hand wears and this can be fixed.
3. I don't like the Colt's trigger feel.
Colt triggers do feel different from S&Ws. Most shooters prefer the latter. I use both without worrying about it. Also, parts swapping is a bear because of all the hand-fitting on the Python.
On the plus side for the Python, the barrels are bored .001 undersized so they tend to out shoot the S&Ws. They also have a certain panache.
BTW- Who says Pythons aren't shooters? I currently have two (1 4" and 1 6") and I shoot both of them regularly along with all of my other older Colt revolvers (see pic). The 6" Python made the group pictured using full-power magnum ammo.
1. Why are they so expensive?
"Because they should be," -Jeff Cooper
2. They break or wear out.
The Colt lockwork is less sturdy than the S&W design. But it's not weak. What usually happens is the the hand wears and this can be fixed.
3. I don't like the Colt's trigger feel.
Colt triggers do feel different from S&Ws. Most shooters prefer the latter. I use both without worrying about it. Also, parts swapping is a bear because of all the hand-fitting on the Python.
On the plus side for the Python, the barrels are bored .001 undersized so they tend to out shoot the S&Ws. They also have a certain panache.
BTW- Who says Pythons aren't shooters? I currently have two (1 4" and 1 6") and I shoot both of them regularly along with all of my other older Colt revolvers (see pic). The 6" Python made the group pictured using full-power magnum ammo.
- Status
