Alliant Bullseye. Remington 115 gr FMJ Reloading Help!!!

[zshaw8442]

Looked at the Alliant website and listed 115gr GDHP at 4.7 grains. The website also directed to start out at 10% lower, so about at 4.23 grains I suppose. Is this supposed to work for my remington 115gr FMJ as well? New to reloading, so any help would be greatly appreciated.

 

[LiveLife]

For 115 gr FMJ RN, it lists 5.0 gr as max load but I started my work up from 4.0 gr for my Winchester 115 gr FMJ RN. In my Glocks, 4.2-4.3 gr shot very accurate at 1.125" OAL.

This is from Alliant's 2004 Reloader's Guide:

 

[zshaw8442]

Awesome. Thank you so much for the data.

 

[fourrobert13]

4.6gr was a nice shooting load out of my Glock 17. 1.12 OAL.

 

[MrWesson]

That load should work out nicely.

When loading 9mm OAL is very important. That is the best tip I can give you. Oh and shoot lead bullets or cast your own for big savings.

Bullseye is an awesome 9mm target powder with tons of load data available. I like it for working a powder puff load as a stepping stone from .22 for people new to shooting.

 

[zshaw8442]

Thanks guys for all the good info. I really appreciate it.