Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
Im hoping to find some load data here. Bought a box of 500 Rainier Ballistics 115 grain 9mm Hollowpoints and i cant seem to find any load data for them. I am using Alliant Bullseye powder. thanks for any help!
Not HP's, but I have loaded many Ranier 115 Gr RN bullets. Start at the bottom of jacketed data and work up. They are not limited to lead data, but can not use some max jacketed data either. Plated bullets are their own little animal.
That said, I routinely shoot the 115 Ranier at max jacketed data with N330, WSF, and AA #5. I would suggest stopping at 80% of jacketed data if you are not comfortable with it.
The Alliant Powder web page shows 4.7gr of Bullseye as the max load, when using a minimum OAL of 1.125 inches. That would mean you'd start loading at 4.2gr (10% less) using any OAL at or longer than 1.125 (and of course not to exceed 1.169).
This info came directly off this page.... Alliant Data. Learn to use the powder maker's web page! That's your best resource.
Also to remember....
• As your OAL gets longer, you'd need to slightly increase the load. Exactly how much you can learn by experimentation.
• Further reduce this published load by approximately 0.1gr because you're using plated bullets.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.