Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

AR-15 bolt inspection

Discussion in 'Rifle Country' started by Blackbeard, Sep 16, 2007.

Thread Status:
Not open for further replies.
  1. Blackbeard

    Blackbeard Member

    Joined:
    Jun 16, 2007
    Messages:
    1,722
    Location:
    Behind the Daley Curtain (IL)
    I have an almost new RRA AR15 and I have a question. One of the "teeth" on the front end of the bolt is shorter than the others. Is it supposed to be like that? If so, does it go on the left or right side when inserting the bolt into the carrier?
     
  2. .45Guy

    .45Guy Member

    Joined:
    Sep 6, 2005
    Messages:
    2,305
    Is it the one on the extractor? If so, it's normal.
     
  3. Onmilo

    Onmilo Member

    Joined:
    Jul 26, 2004
    Messages:
    9,773
    Location:
    Illinois`
    And Armalite began shortening one of the off side bolt lugs to decrease lug wear and stress wear in the cam pin hole area.
    It is conceivable that Rock River is getting at least some of their bolts from Armalite.
     
  4. Blackbeard

    Blackbeard Member

    Joined:
    Jun 16, 2007
    Messages:
    1,722
    Location:
    Behind the Daley Curtain (IL)
    Thanks for the info, guys. Took the plunge and did my first field strip and cleaning of the AR today. No parts left over at the end so I guess I did it right.
     
Thread Status:
Not open for further replies.

Share This Page