BCM Gunfighter Mod 0 Comp Review

Status
Not open for further replies.

plouffedaddy

Member
Joined
Nov 1, 2011
Messages
371
Location
SC
picture8zbr.png


picture27h.png


The BCM Gunfighter Compensator Mod O has been out for a while now and I've had it for a few months; here's what I've found.

Pros:
-The dimensions match up with the standard bird cage so suppressors that use the A2 will work on this. As will blank firing adaptors.
-Helps with muzzle rise vs the A2
-No where near as much side blast as standard side ported brakes/comps
-Stainless steel construction.
-This is the standard size (Mod 0) but the Mod 1 is available to be used on 14.5'' pinned barrels to comply with NFA laws
-Retails for $90 +/- $10
-Less flash signature than standard side ported comps

Cons:
-Not as much muzzle movement reduction as the Battlecomp (but it costs less than the Battlecomp). The recoil impulse feels like the gun wants to move a little right or left rather than up or back.

Here's a review with some day and night shooting, a side by side comparison of the flash signature with the Battlecomp, and a discussion of the pros and cons of the comp:

 
Is it close enough in size and looks to the A2 that the it can be used on a National Match set up and be within match rules?

Do you have any close up pics of it from the side?
 
Is it close enough in size and looks to the A2 that the it can be used on a National Match set up and be within match rules?

Do you have any close up pics of it from the side?

I don't have any pictures side by side with the A2 on file sharing sites to post here but in the last few seconds of the video above there's a photo just like that rolled in.
 
Status
Not open for further replies.
Back
Top