Bedding Supplies for Krag project

[pccraig]

I'm working on accuirizing an old Krag that was sporterized around 80yrs ago.

It was originally a full length Krag that had it's barrel cut down to 24" and had a very shoddy sight system. I've replaced the sights, and I'm going with a replacement carbine stock without the rear sight cutout in the upper handguard.

I've got some nicely sized alluminum spacers that I'll use as pillars and I plan to get a glass bedding compound kit, but I need some extra long headless action screws.

Can anyone lead me to a source for some ?

 

[rcmodel]

They are 1/4" x 25 TPI, the same as the 03 Springfield.

http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=6644&title=INLETTING GUIDE SCREWS

http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=6645&title=STOCKMAKER'S HANDSCREWS


rcmodel

 

[pccraig]

thanks

 

[Fill]

Have you considered Devcon (steel epoxy) instead of glass?

 

[pccraig]

No, I just ordered an AGRA-GLAS kit from Brownells. I understand the stuff is pretty good. It's my first attempt at this.

 

[Fill]

I've had real good luck with the Devcon Steel-Putty. here's a good tutorial.