Berreta M9A3 red dot mount

[a2x4bbl]

Not a lot of options for red dot mounting on this one . Could have mounted it .250 lower but you would have to remove the top plate to take off the slide for cleaning . Wasn’t appealing to me . Open sights are usable , kinda . All stainless . Time to build a compensator.

 

[Shipwreck]

Very cool.

There is also a mount that you can use that goes in the rear sight dovetail. The guy who makes it is on the Beretta Forum

 

[JTQ]

Nice work.

Since you have a rail on your gun, I thought they made a rail mount that would take a red dot sight. The sight in this video may be drilled into the frame like yours, but I thought it was mounted to the rail.



You can also have you slide milled https://www.langdontactical.com/custom-gun-work-ltt-rdo-elite-optic-cut-for-your-92-slide/

 

[a2x4bbl]

I saw the Berreta team had a couple open class guns and it used the rail for the optics mount . The mount was a work of Art , but for me it looked like it lowered the dot about .200 lower than what I did . I decided on the frame mount . Also theirs would require removing the mount to remove the slide . What I did is lower than a dovetail mount . If I went with a dovetail mount I wouldn’t get to mill and drill , where’s the fun in that . The barrel in these guns sits so close to the top of the slide anyway .