armoredman
Member
When multi stage rocket orbital lifts off, the first stage is the booster, the main lift, the massive thrust that gets the payload off the ground with breakaway speed. This is the greatest effort, when raw power are combined with precision accuracy, calculated to the nth degree. Okay, this wasn't QUITE that precise...but it IS Stage 1.
First, let me introduce an old manufacturer with a new product. Say hello to Berry Manufacturing in Utah, USA.
Berry's has been making plated bullets since before I was born, and carries a wide range of reloading supplies as well. I think half of my blue plastic reload boxes have the Berry's name on them.
But, this has nothing to do with ammo boxes, but with a brand new product Berry is launching, a 7.62x39mm rifle plated rifle bullet. This is the Berry's 125 grain plated rifle bullet, sitting with the other two bullets I load currently in this caliber.
As you can see, it is an interesting flat point design I wasn't expecting. The ogive is gracefully tapered, and the plating appears to be even and consistent. The box says Double Struck - I have NO idea what that means, but as I was to see later...it must mean something good. Bullets were measured with my handy dandy dial calipers, and in the sample group length varied from .791 to .785. I can live with that. Diameter is an exact .311.
Here we are at the beginning, box 'o bullets in the background, prepped cases up front, Loadbook of data to start with...Loadbook?
Waitaminnit, I thought plated bullets had to be shot at cast lead velocities, shouldn't I be using the Lyman data? Ya know, I've heard that too, but I had an itch, and wanted to see what they would do at low/middle jacketed velocities. You see, Berry's has a thicker plating than other plated bullets, so I am willing to give it a go with what I have on hand at jacketed speeds. I'm told that distinct markings will show if they shed their plating in flight, and a plated bullet that sheds its plating in flight will tend to be wildly inaccurate. OK, that should be easy to spot.
Three powders are in my miniature powder magazine, my old standby, Accurate Arms #1680, then Hogdon H-335 and Hogdon H4895, both left over from my .303 and .223 loading days. Well, Loadbook has data for 7.62x39mm for both of the Hogdon powders, so lets give it a whirl, shall we?
It was a beautiful day at the range, light breeze as you...can't...see...forgot the camera. Dagnabbit. Ok, picture a beautiful morning, light cross breeze, birds singing, sun just peeking over the mountains, not bad for a morning that began with a screaming cat fight next to my ear at 0530. Seriously. See why I went to the range early? Relaxation.
First up, my old standby, Accurate Arms #1680, beginning data for a 125 grain jacketed bullet. All rounds were fired from me beloved light rifle, my CZ 527M, seated and rested. No Lead Sled yet, someday, someday. BTW, the target was made by blarby on thehighroad.org, free download. Nice work, isn't it? Thanks, dude! Squares are 1 inch diagonal.
Not bad, but the dark marks were what I was told to expect from a plated bullet shedding the jacket. If so, not bad for "wildly inaccurate"
This was just the beginning.
Same load, group 2.
Hmm, Consistent. Lets move it up a full grain.
First dud. I had forgotten the CZ 527M is NOT wild about CCI 200 primers. Oops. Next series will be loaded with the Remington 9 1/2s. Group 2 with 24 grains of AA#1680.
That's not bad at all. Well, lets see what the bottom load of H-335 will do - whoa! That's a FULL case! I wasn't quite sure if I wanted to try this one. It had substantial recoil for the caliber.
Well, it shot quite well. Group 2.
Not bad at all, but the recoil was stiffer than I thought it should be. Cases showed no signs of over pressure whatsoever. OK, last powder, H4895. What can it do at it's beginning load data from Loadbook?
Not bad. ANOTHER dud. Gah. Group 2.
Great Scott. That's a five shot group, or should I say two, two shot 1 hole groups and a flyer! Found the sweet spot already?
Every target exhibited the "leading" ring, but if this is a "wildly inaccurate" bullet, I'll eat my rifle, butt first. Without salt. Or hot sauce.
Well, all I can say is wow, this is an excellent bullet. If you have ever loaded for this caliber, you NEED to try this bullet. Berrys' got this one right, right out of the gate.
In the CZ 527M bolt action carbine this works like a champ. But what about in the semi-auto vz-58???
Stage one burn complete, detach. Stand by for Stage Two ignition....
First, let me introduce an old manufacturer with a new product. Say hello to Berry Manufacturing in Utah, USA.
Berry's has been making plated bullets since before I was born, and carries a wide range of reloading supplies as well. I think half of my blue plastic reload boxes have the Berry's name on them.
But, this has nothing to do with ammo boxes, but with a brand new product Berry is launching, a 7.62x39mm rifle plated rifle bullet. This is the Berry's 125 grain plated rifle bullet, sitting with the other two bullets I load currently in this caliber.
As you can see, it is an interesting flat point design I wasn't expecting. The ogive is gracefully tapered, and the plating appears to be even and consistent. The box says Double Struck - I have NO idea what that means, but as I was to see later...it must mean something good. Bullets were measured with my handy dandy dial calipers, and in the sample group length varied from .791 to .785. I can live with that. Diameter is an exact .311.
Here we are at the beginning, box 'o bullets in the background, prepped cases up front, Loadbook of data to start with...Loadbook?
Waitaminnit, I thought plated bullets had to be shot at cast lead velocities, shouldn't I be using the Lyman data? Ya know, I've heard that too, but I had an itch, and wanted to see what they would do at low/middle jacketed velocities. You see, Berry's has a thicker plating than other plated bullets, so I am willing to give it a go with what I have on hand at jacketed speeds. I'm told that distinct markings will show if they shed their plating in flight, and a plated bullet that sheds its plating in flight will tend to be wildly inaccurate. OK, that should be easy to spot.
Three powders are in my miniature powder magazine, my old standby, Accurate Arms #1680, then Hogdon H-335 and Hogdon H4895, both left over from my .303 and .223 loading days. Well, Loadbook has data for 7.62x39mm for both of the Hogdon powders, so lets give it a whirl, shall we?
It was a beautiful day at the range, light breeze as you...can't...see...forgot the camera. Dagnabbit. Ok, picture a beautiful morning, light cross breeze, birds singing, sun just peeking over the mountains, not bad for a morning that began with a screaming cat fight next to my ear at 0530. Seriously. See why I went to the range early? Relaxation.
First up, my old standby, Accurate Arms #1680, beginning data for a 125 grain jacketed bullet. All rounds were fired from me beloved light rifle, my CZ 527M, seated and rested. No Lead Sled yet, someday, someday. BTW, the target was made by blarby on thehighroad.org, free download. Nice work, isn't it? Thanks, dude! Squares are 1 inch diagonal.
Not bad, but the dark marks were what I was told to expect from a plated bullet shedding the jacket. If so, not bad for "wildly inaccurate"
This was just the beginning.
Same load, group 2.
Hmm, Consistent. Lets move it up a full grain.
First dud. I had forgotten the CZ 527M is NOT wild about CCI 200 primers. Oops. Next series will be loaded with the Remington 9 1/2s. Group 2 with 24 grains of AA#1680.
That's not bad at all. Well, lets see what the bottom load of H-335 will do - whoa! That's a FULL case! I wasn't quite sure if I wanted to try this one. It had substantial recoil for the caliber.
Well, it shot quite well. Group 2.
Not bad at all, but the recoil was stiffer than I thought it should be. Cases showed no signs of over pressure whatsoever. OK, last powder, H4895. What can it do at it's beginning load data from Loadbook?
Not bad. ANOTHER dud. Gah. Group 2.
Great Scott. That's a five shot group, or should I say two, two shot 1 hole groups and a flyer! Found the sweet spot already?
Every target exhibited the "leading" ring, but if this is a "wildly inaccurate" bullet, I'll eat my rifle, butt first. Without salt. Or hot sauce.
Well, all I can say is wow, this is an excellent bullet. If you have ever loaded for this caliber, you NEED to try this bullet. Berrys' got this one right, right out of the gate.
In the CZ 527M bolt action carbine this works like a champ. But what about in the semi-auto vz-58???
Stage one burn complete, detach. Stand by for Stage Two ignition....