Bought a NRM Colt

Status
Not open for further replies.

Brazos

Member
Joined
May 12, 2004
Messages
73
Over the weekend I went to the gun show and picked up a NRM Colt .45 Blued. Two different dealers had them on the table, both $540. Both of the pistols on the table were tight and looked great. Before leaving the show I picked the closest table and made the deal. Of course the dealer pulled out another pistol he had under the table. I quickly looked over it and it was as good as the ones I had inspected so I took it. I go it home and cleaned it up. I have to say this is the tightest pistol I have in the safe. I have only read about how tight Les Bears are and this pistol is what I had imagined a Les Bear would be (as it relates to slide/frame/barrel tight, no i am not saying this $540 pistol is as good as a LB). The overall finish and grips are perfect. The trigger pull is guesstimated at 4.5 pounds (in comparison to another GM I have that does have a 4.5# trigger pull) and crisp. The trigger is somewhat loose, not what I consider hand fit, but mass produced. I took it to the range yesterday and ran a box of W Whitebox and 100 200&185gr SWC handloads I had on hand. No FTF to report. The gun shot about 2-3" high off hand at 25 yards but was centered. No hammer bite, but I do have smaller hands than most. Overall I am very pleased with my puchase. I just wanted a more traditional GM w/o all the bells and whistles to have in the collection (The older I get the more I think allot of stuff we add to 1911's is really not needed and screws up the classic look of a 1911). I think a pistol of this quality for $540 is a great deal. If I change anything I will probably handfit another trigger and maybe loose the plastic main spring housing, though the MSH looks and feels fine. Basically if you have considered this type pistol don't overlook the NRM Colts.
Brazos
 
The gun shot about 2-3" high off hand at 25 yards but was centered.

Did you get the same result with 230gr. ammo?

I get hammer bite from the old style WWI blade hammers on the really old guns and the Sistemas, but I don't get it from the newer style spur hammers on most 1911's nor do I get it from BHP spur hammers.
 
NRM Colt

Yes, all three loads (230/200/185 gr) all seamed to shoot 2-3" high off hand at 25 yards (same POI). This did suprise me. For what it was worth I had a S&W titanium J frame and a glock 19 and all 3 were shooting 2-3" high (though the J frame was shot at 15 yards). It was a rushed trip to the range so I just shot and didn't try to analize. I plan to go back when I have more time to see if I was having an off day, since the S&W and the Glock typically shoot dead on at the given range. I was shooting a 4"-5" group with the Gov. Model, which I figure was fine for 25 yards offhand. I am going to load up some more rounds and see what she will do from a rest next trip. This new Colt is a great looking gun. I have allot of pistols in the safe that will be collecting dust for a while.

Brazos
 
I have had one for about three weeks.

They really are the pistols to get right now.

I bought a NRM Colt 1991 Government Model Blue... the Commander is on it's way.



Cameron
 
Last June, June 3rd 2003 to be exact, I purchased a NRM stainless Gov't Model. It is a great pistol. Yesterday, June , 4th, 2004 I was at a shop and found a LNIB blued ORM Gov't Model. Beautiful fit and finish, and brought it home to keep my stainless company. If the June thing keeps up, hopefully next June I will get to add a Special Combat.:D
 
These new 1911's coming from Colt seem to be very well made. Quite surprising to see such quality from a company that has gone out of business. Colt has gone out of business you ask? Sure, just ask any gunshop commando and they will tell you that Colt is kaput and Kimber makes the best 1911 to ever hit the shelves, why, even Les Baer can't make a 1911 better than Kimber!:D
 
Status
Not open for further replies.
Back
Top