gaowlpoop
Member
Idano
I made the thing out of scrap I had from other projects. The cloth is held on by sections of pvc pipe I split and then just slipped on over the the fabric.
As far as the screen is concerned, the brass may bounce off. I found that even the cloth can act as a trampoline and bounce the brass right back out. You need lots of "bag" in it to allow the brass to just sort of settle in.
You will note that the legs are sort of splayed out. This helps in the wind. You can use some 22 or 45 degree fittings but I did not have any so I just heated the pvc with hot water and bent it. Also the legs are not glued on. They can be removed for transport or in my case, my wife is very short so I made a set of legs just for her.
I made the thing out of scrap I had from other projects. The cloth is held on by sections of pvc pipe I split and then just slipped on over the the fabric.
As far as the screen is concerned, the brass may bounce off. I found that even the cloth can act as a trampoline and bounce the brass right back out. You need lots of "bag" in it to allow the brass to just sort of settle in.
You will note that the legs are sort of splayed out. This helps in the wind. You can use some 22 or 45 degree fittings but I did not have any so I just heated the pvc with hot water and bent it. Also the legs are not glued on. They can be removed for transport or in my case, my wife is very short so I made a set of legs just for her.