Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

browning bda .380 grips.

Discussion in 'Handguns: Autoloaders' started by spence, Apr 29, 2010.

Thread Status:
Not open for further replies.
  1. spence

    spence Member

    Joined:
    Mar 10, 2009
    Messages:
    147
    does anyone know of grips that will slim down the fat little grip of the bda .380? thanks spence.:eek:
     
  2. jbkebert

    jbkebert Member

    Joined:
    Jan 30, 2009
    Messages:
    2,599
    Location:
    Kansas
    The only slimmer grips I have found are made by Pachmyer. Here is the setback they work on the BDA but were made for the Berretta 84. Basically they are the same gun but the 84 has a frame mounted safety instead of the slide mounted of the BDA. So there is a cut out for the frame safety that may allow a pin in the BDA to drift out. Check out the last few post of this thread.http://www.thehighroad.org/showthread.php?p=6337236#post6337236
    Good luck and if you find anything that I have not please let me know.
     
  3. dogtown tom

    dogtown tom Member

    Joined:
    Jan 15, 2006
    Messages:
    4,301
    Location:
    Plano, Texas
    Pachmayr made grips specifically for the BDA. I have a couple pair and they are not the same as the 84's.
     
Thread Status:
Not open for further replies.

Share This Page