Ok I used the Hornady OAL gauge to find the OAL of my Remington 788 243 and would like some feed back to make sure I am doing this right. I used the bullet comparator to do the final measurements. The comp length I got measuring off the lands was 2.337 inches. To start I was going to back the bullet .040 off the lands so that would be 2.297 or lets call it 2.300. The OAL of the cartridge is 2.710 which is also the max OAL listed in my Speer manual. Dose this look right? My throat seams to be quite long. Is there a problem with how far the bullet is set above the crimp grove (last pic)?