castile
Member
- Joined
- Jun 19, 2012
- Messages
- 602
I don't know if its some or all, but I ordered a BFS from Texas. What I got was a stock that bound up. I have a Colt and PSA and Anderson lower. First off the block that takes the place of the pistol grip would not fit. It was so small I could not get it started with a screw driver prying it. I had to take a file to remove some material to get it to fit. Once that was done the stock bound up when fitting the stock to the block and tube. After looking at it I found that the block needed to be canted about two deg. to line up with the tube. I put small amount of tape on the block to make it line up with the tube. This seemed to work but it needed some fitting with sand paper to make it work properly. Yes they sell for 99 bucks but this is low quality. The other problem with BFS is non existent CS. I emailed them with only one response. We take returns. OK, I asked do you have a shipping tag or return address or return authorization no? Three days and nothing.
