• You are using the old Black Responsive theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.

Butt cuffs/side-saddle holders

Status
Not open for further replies.

cratti

Member
Joined
Feb 3, 2009
Messages
138
So, I have a 5 shell cuff for my FP6, and I was just curious; how does everyone load their shells into that thing? I've learned that it's quicker to pull one out and stick it in the mag (or chamber, even) if I put the shells in upside down (brass facing downward) since having to go up, over, and around the gun just seemed awkward and slow. At first I was concerned about how secure the shells would be, then I realized, for all the effort it takes to stick five shells into that thing, they should be fine unless I'm using the dang gun as a club (What, my precious fabarm used as a heavy stick? Never!)

More thoughts? Could be an interesting discussion.
 
Holding the gun in my right hand I load with my left from the sidesaddle or butt cuff. The rounds in the sidesaddle or butt cuff are brass down. I've been doing this for years.
 
I use a 5-rd cuff.

3- 00 buck brass down

2- slugs loaded brass up.

Now you know what your options are in the dark.
 
Buck is loaded brass down, and slugs brass up, for the same reason CWL stated.

I don't like butt cuffs though. Limits the shotgun to one shoulder, so I use a side saddle.
 
I have a four-round sidesaddle on my 870, which is loaded with two buck up front and two slug behind; they're color-coded red and green, and the buck is 3" so that I can tell the difference by feel if need be - the 2 3/4" slugs don't protrude past the bottom of the sidesaddle.

They're loaded brass-up as I find that my fastest reloads are directly into the chamber; simply cant the gun to the left a bit and stuff a shell in with the left hand. If you've got enough time to top off through the tube, it's not really going to matter how the shells are oriented.
 
Buck brass down, faster for me to load.

Slugs brass up less likly to need them.

No need to look can tell by feel what I'm loading.
 
the brass up/down thing is a nice idea, but frankly, don't use slugs for much seeing as i'm currently living in a trailer. in fact, i'm playing it safe and using #4 shot. sure, there's still the inherent risk of penetrating a wall, but it'll be a heck of a lot less dangerous than with double-ought or a slug.
 
Status
Not open for further replies.
Back
Top