Cast handgun boolits, and lyman Moly

[M ammo]

I just got the equipment together, to try my hand at moly coating cast lead bullets.

I have been casting my own, bullets for 18+ years,,,

I sell some,, to help cove my own re-loading costs,,

from the reading I have done. I see a real mixed bag,, of results with cast lead.

some folks say it made the bullets lead the barrel,, much worst,,,

some folks Love the moly,,,

I have read the directions,,, but I'm looking for any inside tips,, you can tell me,,, on how to get it right,,,

Thanks jim

 

[USSR]

from the reading I have done. I see a real mixed bag,, of results with cast lead.

some folks say it made the bullets lead the barrel,, much worst,,,

Why bother? With a properly lubed bullet, leading is a result of either a wrong size bullet and/or a improper alloy.

Don

 

[M ammo]

hmmmm
good point,,

I size the 9mm's to .356

and I add Tin to WW.

they don't lead my barrel,,

but guys I sell them too,,, now and again,, say they,, have had leading,,

I'm hoping the moly cost and the blue Angle cost is about the same,,