Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Colt Sistema Commander hammer

Discussion in 'Gunsmithing and Repairs' started by elpitirre, Mar 6, 2003.

Thread Status:
Not open for further replies.
  1. elpitirre

    elpitirre Member

    Joined:
    Mar 5, 2003
    Messages:
    4
    Location:
    Florida
    I want to install a Commander hammer in my Colt Sistema 1927. I tried a Chip McCormick for Colt Series 70 but did not worked. Which one I can get that will work as a drop in without modificatins or fitting? Thank you.
     
  2. yankytrash

    yankytrash Member

    Joined:
    Feb 24, 2003
    Messages:
    367
    Location:
    Farnham, Va
    Can't help with which hammer to buy, but I know you might need a Commander grip safety to fit a Commander hammer.

    Try emailing Wilson Combat, they're very helpful and should be able to fix you right up.
     
  3. stans

    stans Member

    Joined:
    Dec 27, 2002
    Messages:
    2,426
    Location:
    central Virginia
    You will must either bob the hammer so the rowel does not impact the top of the grip safety, or install a Commander model grip safety, or machine a clearance area into the top of the Government model grip safety.
     
Thread Status:
Not open for further replies.

Share This Page