Cva snake eyes derringer help needed

[A34]

Hi guys!

I am having trouble installing the hammer springs on a CVA kit gun snake eyes derrringer. Is there a special tool required? How do you do this? I tried needle nose and couldn't do it. Any advice on how to do this?

pics are from the gun as I got it. I disassembled, cleaned and am now "trying" to reassemble.



Thanks!

Get Outlook for iOS

 

[Fyrstyk]

Is that a CVA gun? or a Classic Arms gun? If it is a Classic arms gun, I believe you will find assembly instructions on-line if you plug in Classic Arms Snake eyes.

 

[A34]

Thanks, I'm not sure. I have instructions, they don't really explain it. Or I'm too stupid to understand. I broke one spring trying to install it.

 

[Jackrabbit1957]

Hammers need to be all the way down, you should be able to place the spring under the hammer, grab the bent end with a pair of pliers and pivot the end into the frame. It may take some finageling and a fair amount of cussing but it should go.

 

[wiscoaster]

Hammers need to be all the way down, you should be able to place the spring under the hammer, grab the bent end with a pair of pliers and pivot the end into the frame. ...

That's how I interpret the instructions and the pics as well.

 

[A34]

Thanks guys, that helped!

 

[wiscoaster]

Wow!! That really turned out well!!