Dating a sears model 53

Status
Not open for further replies.

bluejeans

Member
Joined
Jan 25, 2015
Messages
554
Location
idaho
looking a a sears model 53 at a local auction.. caught my eye as being in the Winchester model 70 family so I did some reading up. I have a jc Higgins model 50 that has been my go to deer rifle for years so I’m familiar with the sears rebranding and that isn’t an issue to me. I’ve wanted a model 70 pre 64 for quite a while and this could be my chance... There is no picture of the bolt face to help ID it but the serial number is 141xx which seems pretty low so I’m hoping it’s pre 64... I did some googling but was unable to find a manufacture year .
Can someone tell me what it is?
Thanks
 
There's a ton of information on Google about these rifles. They are the post 64 push feed action made sometime between 1964 and the early 1980's. There was a standard version and a Ted Williams version that was dolled up for extra money. The Ted Williams version had an ebony cap on the forend of the stock, a fancier version of pressed checkering and a hinged floorplate.
 
bluejeans, the situation in getting a pre 64 Model 70 is not very good right now. The prices have really gone up in the past two years. It would be better to buy a newer controlled feed Model 70 because you can buy them for less money than you would spend on a pre 64.

But, on the other hand I have always been fascinated with the pre 64 Model 70 and although the new ones are nice and pretty they just can't take the place of a really good pre 64. All you have to do is to get one of the pre 64 rifles in your hands and compare it to the new ones and the old rifle says keep me. Currently, I like the pre 64 featherweight better than the standard version because I am a hunter and it is better to buy a 30-06 because there are more of them and they are cheaper and easier to find. When buying a pre 64 Model 70 it's all about the condition of the metal and the metal alone in very good condition is worth at least $750. The money above $750 is what you are paying for the stock. If you have the metal you can always tweek it as you go along by getting the stock that you want along with the other accessories. Keep looking and you will get what you want. I would expect a pre 64 featherweight in really good condition to sell for about $950 but in today's market they are being priced much higher than that.
 
Last edited:
Status
Not open for further replies.
Back
Top