I have a load that works great in my G26 (see below). I've recently bought a S&W M&P Shield in 9mm. Do I need to work up to my G26 load in my new Shield? The max per my Lee reloading manual is 5.5gr, Sierra says 6.6gr is max. I worked up the G26 load below until reaching 5.7 without seeing any pressure signs.
Glock 26 Load:
Berry's 115gr Plated Bullets
5.3gr of Unique
Winchester Small Pistol Primers
OAL 1.130
1089 average FPS
Taper crimped
Thanks for the advice, I do appreciate it
Glock 26 Load:
Berry's 115gr Plated Bullets
5.3gr of Unique
Winchester Small Pistol Primers
OAL 1.130
1089 average FPS
Taper crimped
Thanks for the advice, I do appreciate it