Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Do you own a T/C Cherokee ? Help ?

Discussion in 'Blackpowder' started by BADUNAME30, Apr 3, 2013.

Thread Status:
Not open for further replies.
  1. BADUNAME30

    BADUNAME30 Member

    Joined:
    Mar 24, 2009
    Messages:
    1,876
    Location:
    Neshannock, Pa.
    If you own a Cherokee, would you please be kind enough to take the measurement like the one in the pic ?
    This pic is of a Seneca Bbl and the measurement i get is 9 1/8 inch at the center of the lug.
    I'm trying to determine if the Cherokee Bbl will fit into a Seneca stock.
    IMGP2162.JPG
     
  2. turkeyinstrut

    turkeyinstrut Member

    Joined:
    Aug 11, 2012
    Messages:
    3
    Jim a Cherokee barrel will fit in a Seneca stock but the under-rib will need trimmed just a little.
     
  3. Curator

    Curator Member

    Joined:
    Apr 20, 2007
    Messages:
    1,201
    Location:
    Bonita Springs, Florida
    Yes, the forearm on the Seneca is a bit shorter than the Cherokee. The barrels are identical from breech to barrel key tenon, but the under rib on the Seneca barrel is slightly longer. The barrel switch is easier when using a Cherokee barrel on a Seneca, but the Seneca under rib is easily shortened to fit the Cherokee stock.
     
  4. BADUNAME30

    BADUNAME30 Member

    Joined:
    Mar 24, 2009
    Messages:
    1,876
    Location:
    Neshannock, Pa.
    Thanx fellas. I do 'preciate the info. I found a .45 Cherokee Bbl but then durin' sealin the deal........no more contact. :confused:
     
Thread Status:
Not open for further replies.

Share This Page