I just got done loading a few .257 roberts for my son. I thought I would try some 110 gr accubonds in this cal because I have had good success with these bullets. I trimmed the case to 2.225 which is just under the max of 2.233. Here is my problem. when I set the bullet to the max OAL, the bullet is actually seating too far into the case and I can't get it to seat tight even with a crimp. I crimped it and I can spin the bullet with a little twist of my fingers. What am I missing? I am fairly new to reloading, but have loaded many rounds without a problem. I have never encountered this and looked at everything I can think of. Does anyone have any advice? Thanks.