G2 trigger group for Saiga conversion

[SSN Vet]

any consensus out there as to the best performing G2 trigger group?

is the Tapco single hook G2 trigger group "plug and play" in a 7.62x39 Saiga?

thanks in advance.

 

[JWarren]

I have a single hook Tapco G2 in my Saiga 308 conversion. It has some pre-travel, but little over-travel. It breaks crisp.

Because I am finishing my S-308 up as a DMR-role rifle, I'll most likely replace the Tapco G2 with a RSA adjustable trigger and see how it goes. If I don't like it, the Tapco will work fine.

is the Tapco single hook G2 trigger group "plug and play" in a 7.62x39 Saiga?

It should be. My understanding is that the 308 is the only one where you may have to do some trimming of the hammer.


-- John

 

[FMJMIKE]

Tapco G-2s worked in all my Saiga conversions without modification. This includes .308, .223 and 7.62 X 39.

 

[MRIman]

I've got a G2 trigger and disconnector in my S-308 conversion.
The hammer needed some work to fit the bolt,and I didn't need the
US part,so kept the Russian hammer. I made my own floor plates
for my mags so all is good.
Not sure of the hammer fit on a 7.62.
Should be fine though.

MRI