R.W.Dale
Member
Im experiencing some difficulty getting the numbers tamed on my new encore project a 357 Max 24" rifle.
I've tried two powders aa1680 and 110/296 using cci 41 and 400 primers respectively. Bullets are 180g hornady ssp.
With both powders some charges are pushing 100fps variations high to low and needless to say accuracy suffers accordingly.
The 1680 loads are seated quite long with appx 1/2 a calibre worth of bullet in the case. H110/296 loads are seated in the crimp groove.
As different as these two loads are they seem to suffer from the same affliction.
Any help is much appreciated in advance.
posted via that mobile app with the sig lines everyone complaints about
I've tried two powders aa1680 and 110/296 using cci 41 and 400 primers respectively. Bullets are 180g hornady ssp.
With both powders some charges are pushing 100fps variations high to low and needless to say accuracy suffers accordingly.
The 1680 loads are seated quite long with appx 1/2 a calibre worth of bullet in the case. H110/296 loads are seated in the crimp groove.
As different as these two loads are they seem to suffer from the same affliction.
Any help is much appreciated in advance.
posted via that mobile app with the sig lines everyone complaints about