Ghost Rocket...

[emfuhmiss]

Hello everyone, just joined THR.

I recently purchased a Ghost Rocket 3.5# for my Glock 21... I just installed it and when i pull the slide back to cock it theres no action in the trigger... Any ideas?

Ok... So, my dumb ass thought that i bought the kit, but indeed only bought the Ghost Rocket... A firing pin spring and trigger spring might help!

 

[gofastman]

you do realize that is not a drop in part right? (I'm not trying to patronize)

 

[Hk Dan]

Okay--you need to file the overtravel stop guy. The former poster is correct, it is not a "drop in and go" part, it must be fitted to your firearm, and that means a lot of careful filing on that overtravel stop. Significant amounts of metal need to come off. It won't be '3 swipes and over', more like 1/8th inch before you can even begin to fit it.

Right now the overtravel stop is holding the trigger bar from touching the striker.

Make sure you have the armorer's half back plate or you are in for a LOT of pain. You'll have to remove the full back plate, then the striker, and take the slide off every time you want to adjust the overtravel. With the half back plate you can release the striker without all that hassle.

Dan