Good sharpeners and methods for knives and hachets?

Status
Not open for further replies.
I tried the Lansky system and found it awkward to use, I get a better edge freehand than using the contraption, on the other hand, their stones that go with the system are very nice. I use those for freehand, the ceramic stone is really nice in there.
 
For knives I use an old boy scout stone. Stainless blades take a little more finesse and carbon no time at all.

For hatchets, axes, and shop scissors I use a fine file.
 
A Spyderco Sharpmaker is about as idiot-proof as it gets.

I use one.
 
Yup , a sharpmaker and a nice ceramic rod for touchup and you will find yourself using the aggressive grits less and less.
 
Thanks for the suggestions. I looked at the Gatco and Lansky systems, and it looks very awkward to use and too many parts. I can see myself losing parts in the field.

The Spyderco Triangle Sharpmaker looks promising as it has less parts.

I really was hoping I could find a good whetstone that would handle all my sharpening needs.That might be asking too much since I have serrated blades also.

Baldy, could I do serrated edges with the 8" DMT DuoSharp you recommended? Which of the sets do you have? The Website states "The fine/coarse or the fine/extra coarse stones are great stones to own if you're going to own just one stone."
 
The problem with the Sharpmaker is it only does 15 degree and 20 degree angles. Both of those are real common; but if your knife uses something different, you are going to be working a long time to raise a burr with the Sharpmaker's included stone. You can buy a coarser and finer rod to supplement the Sharpmaker; but then you start hitting the cost of more capable sharpeners.

On hatchets, I have an Estwing and just use a 600 grit diamond stone and freehand it doing my best to match the existing angle. That is working well for me right now.
 
Yes out of the sharpeners I've tried - Sharpmaker included - the Wicked Edge system is by far the best and easiet to use. Of course it costs WAY more that the others talked about here but I'm very happy with mine.
 
Which Lansky kit would a guy want to get, if that was the system of choice?
 
Status
Not open for further replies.
Back
Top