Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H&R Excell

Discussion in 'Gunsmithing and Repairs' started by dj_28, Mar 22, 2013.

Thread Status:
Not open for further replies.
  1. dj_28

    dj_28 Member

    Joined:
    May 28, 2012
    Messages:
    46
    I'm needing a gas piston assembly for the H&R Excell. Does anyone know how to get ahold of one? The gun is in perfect shape just missing the gas piston and seals.

    DJ
     
  2. BBBBill

    BBBBill Member

    Joined:
    Mar 7, 2005
    Messages:
    1,890
    Location:
    Alabama and Florida
  3. dj_28

    dj_28 Member

    Joined:
    May 28, 2012
    Messages:
    46
    BBBBill Thanks for the reply, I will give them a call monday. I have tried calling about 4 other places not to mention Munrich,Brownell,Midway, and every other parts site on the web. Everyone I talked to said that the parts where no longer avail.

    DJ
     
  4. BBBBill

    BBBBill Member

    Joined:
    Mar 7, 2005
    Messages:
    1,890
    Location:
    Alabama and Florida
    Well, if they don't have it, try Jack First or look for parts on gunbroker or auctionarms.
     
  5. Hunterdad

    Hunterdad Member

    Joined:
    Dec 23, 2009
    Messages:
    1,873
    Location:
    Syracuse, NY
    Same gun as the Verona 405 if you have trouble finding parts.
     
  6. dj_28

    dj_28 Member

    Joined:
    May 28, 2012
    Messages:
    46
    Already tried Jack first and gunbroker before making this post. May have to try finding parts for the Verona 405.
     
  7. dj_28

    dj_28 Member

    Joined:
    May 28, 2012
    Messages:
    46
    H&R didn't have it either. Can't find anything on the Verona 405.
    Don't know what to do now. If I had one to look at I might be able to make it on the lathe.

    DJ
     
  8. dj_28

    dj_28 Member

    Joined:
    May 28, 2012
    Messages:
    46
    Ok, no luck finding one anywhere. Looks like I'm just going to have to make it. Going to order some 1.5" round stock tomorrow. Don't know if I want to go with alum. or stainless. Leaning toward alum. Any thoughts?

    DJ
     
  9. Sun Tzu warrior

    Sun Tzu warrior Member

    Joined:
    Jun 24, 2012
    Messages:
    371
Thread Status:
Not open for further replies.

Share This Page