H110 in 10MM

[Bandit01]

Alright you gunslingers I need some advice. Anyone of you guys ever used H110 powder in 10MM. Normally, I always use 180 Grain Jacketed bullets. I need to know if there are any safe recipes out there.

 

[Lennyjoe]

H110, no.

But I have used Blue Dot, Power Pistol and 800X for 180gr bullets and AA#9 with 200gr bullets for my 10MM.

 

[Bandit01]

Hey Lenny Joe, I always use AA#7 for 10mm. I found this site where someone used like 17 or 18 grains of H110 in 10MM using a 200 Grain bullet. Personally, I would never pull that trigger but I'm was wondering if it's safely possible.

 

[caz223]

I always assumed that H110 could be used, but it would use a lot of powder, and there are just better choices out there, like blue dot, power pistol, 800x, an AA powder that I havent tried, etc...

 

[Ultima-Ratio]

H-110/296 In 10mm

Hello! Firstly have ya tried the search function here??? Lots of 10mm data here and over at Glock Talk!
H-110/296 is way too slow for the 10mm, in fact you can't get enough in the case to generate anything close to a max pressure..same with 2400 BTW.
AA-9, AA-7, Blue Dot, 800X Power Pistol and Longshot will perk up the 10mm.

 

[Lennyjoe]

I like 800X in the 10MM. Burns alot cleaner and you can get some good power out of it if need be.

Blue Dot was the dirtiest load in my S&W 1006.

Haven't heard of anyone using H110.