Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Headstamp ID help

Discussion in 'General Gun Discussions' started by MD_Willington, Oct 12, 2006.

Thread Status:
Not open for further replies.
  1. MD_Willington

    MD_Willington Member

    Joined:
    Oct 13, 2005
    Messages:
    3,692
    Location:
    Canuck in SE WA State.
    I have a bunch of loose JHP 9x19 with a *I* headstamp.

    What company uses this headstamp :confused:


    Thank you for your time.

    MD
     
  2. Huf

    Huf Member

    Joined:
    Aug 8, 2005
    Messages:
    8
    *I* if from Independence Ammunition. I think it is made by CCI.
     
  3. Jim Watson

    Jim Watson Member

    Joined:
    Dec 24, 2002
    Messages:
    21,983
    It is made FOR CCI by CBC/Mag-Tech in Brazil. Distributed through CCI and Federal (both owned by Alliant) connections.
     
  4. MD_Willington

    MD_Willington Member

    Joined:
    Oct 13, 2005
    Messages:
    3,692
    Location:
    Canuck in SE WA State.
    Thank you for your responses.

    MD
     
  5. kludge

    kludge Member

    Joined:
    Jun 15, 2006
    Messages:
    2,634
    Location:
    Indiana
    Yup. CBC (Magtech). I recently got 1,000 9mm and 1,000 .40 once fired brass from LaserMax (supposedly) This guy --> http://www.millseatcomponents.com/Index.html

    About 10% of it had the *I* headstamp. Resizing required much less effort for the *I* headstamp. Thinner brass? Lower pressure load? No clue, but it caused me to separate the brass.
     
Thread Status:
Not open for further replies.

Share This Page