Gato Montés
Member
So I just bought some 357 ammo. I put one in to see if I got the nice ring of fouling or whatever from shooting 38's out of the cylinder chambers. I then pushed the ejector rod and removed the round. And this is where it gets fun...
The cylinder will not go back into the frame. It gets stuck maybe half way on what looks to be in the center of the cylinder on the opposite side of the ejector rod (so facing the hammer, don't know the term.)
I wasn't hard with it, and I've only gone to the range with it once. Any help would be very, very much appreciated.
The cylinder will not go back into the frame. It gets stuck maybe half way on what looks to be in the center of the cylinder on the opposite side of the ejector rod (so facing the hammer, don't know the term.)
I wasn't hard with it, and I've only gone to the range with it once. Any help would be very, very much appreciated.
