Robert37803
Member
I am reloading 30-06 for my M1 and 1903A3 using IMR 4895. I am using a Dillon 550B. This is my first rifle and bottle neck round project. I have loaded a couple thousand pistol rounds this past year. The problem I am having is in the powder drop stage. Flakes of powder are falling out of this station and my powder charges are off +/- 0.5gn. I have tried the dryer sheet trick and it did not help. I have also tried working the handle rather slow again no change.
I have talked to Dillon and the CSR told me it was just that type of powder, and I understand stick or cylindrical powder is not as easy to throw as ball.
Is there a powder measure out there that I could mount to my bench and use the 550B sort of like a single stage press skipping the powder stage?
Thankful for any help on this matter.
I have talked to Dillon and the CSR told me it was just that type of powder, and I understand stick or cylindrical powder is not as easy to throw as ball.
Is there a powder measure out there that I could mount to my bench and use the 550B sort of like a single stage press skipping the powder stage?
Thankful for any help on this matter.