help with primers

[txheadcase]

hay u all has any one reloaded 9mm and used remington no.5 1/2 small pistol primers i ask for primers to reload the 9mm glock at carters country and that is what they gave me being new to reloading i thought the old man that sold them to me new what he was doing . i reloaded about 100 rounds and fired them no problem . now i have read that i should use no.1 1/2 sm pistol primers.
help 1900 remington no. 5 1/2 small pistol primers left what to do now ? keep reloading with them or what, i am also using tiltegroup powe and 115 gr rn bullets

 

[rcmodel]

There would be no problem using the Rem 5 1/2 Magnum primers in 9mm Luger, as long as you are not loading to maximum pressure already with standard Rem 1 1/2 primers.

You gave no indication of how much Titegroup powder you are using, or whether your bullets are Jacketed, Plated, or Cast lead.

So I can't help you there.

rc

 

[Swede]

I agree with rcmodel, drop back a little on your powder and you should be fine. Sometimes it's good to use a mag primer to get a cleaner burn.

 

[txheadcase]

thanks u all i thought it would be ok

 

[billybob44]

Back off the Titegroup

I'll agree with previous-back off on the charge of TiteGroup-I would not go over the center(Mid- range) of the specs,in your manual. The only other poss. negative to the mag. primers, is the cup is harder. Light fireing pin strikes may cause a FTF. This should NOT be the case with your Glock