Homebrew Case Feeder Plans?

[tommysempra]

I have searched all over the place on the internet, and was hoping somenoe may have a homemade case feeder for progressive presses they would like to share. Feeding the monster for very long manually gets old fast when you are loading a few hundred at a time .

 

[jmorris]

I built the bullet feeder in the photo above. It has since been turned into a case feeder.

I don't know what press you have so I couldn't even suggest a starting point.

 

[tommysempra]

lnl AP is what i have.

 

[tackstrp]

here is the detail url for a lee precision bullet feeder on a hornady l n l

http://sigforum.com/eve/forums/a/tpc/f/840601935/m/2931064641

 

[jmorris]

lnl AP is what i have.

You’ve got your work cut out for you. With the LNL you need everything from the collator to all of the workings that take you from the tube to the shell plate. That’s why it doubles the price of the machine to add case feed. With the 650 everything is already there except the collator.

FWIW the Lee bullet feeder is junk, it drops about as many bullets as it feeds after a few thousand.

 

[tommysempra]

well it sounds like a royal PITA either way ya go. thanks for the info gentlemen