Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

homemade wedge hammer and drift

Discussion in 'Blackpowder' started by Pancho, Dec 18, 2012.

Thread Status:
Not open for further replies.
  1. Pancho

    Pancho Member

    Joined:
    Oct 23, 2007
    Messages:
    1,874
    Location:
    Southwestern, Ohio out in the country about 40 mil
    A little project for you colt shooters to fill the long winter days after deer season is over. It is a lead filled pocket wedge hammer and wedge drift that I came up with that is compact and cheap and will not mar your gun.
    It is a 3" piece of 1/2" copper pipe and a piece of 1/8"X1/2" brass bar stock .
    The copper cap with the slot cut into it is merely a locater to hold the wedge drift in place while filling with lead.
    If you can melt lead you can make it.
    http://www.thehighroad.org/attachment.php?attachmentid=75217&d=1206459972
     
Thread Status:
Not open for further replies.

Share This Page