Hi Guys,
Couple more questions for you...
I'm using Hornady's 9th Reloading Manual for 9mm and have tried 5.1 and 5.4 grains of HS-6 with mixed brass, Winchester Small Pistol Primers and Hornady's 124 grain XTP bullets seated to 1.06"
Issues: In my Glock 34 Gen 3 the slide is not locking back and I've had several failure to feeds. I've been using a Magentospeed Chrono and with 5.1 I was averaging 995 fps with a standard deviation of 22 fps. The same rounds (less tested) cycled fine in my Glock 43. Winchester white box is about .10" longer then I am seating (and not hollow points) which cycles fine. With 5.4 grains being in the middle of the of the pack would you abandon this particular load? I only have 300 rounds left of it and just picked up 3,000 rounds of 115 grain round nose by Hornady.
Couple more questions for you...
I'm using Hornady's 9th Reloading Manual for 9mm and have tried 5.1 and 5.4 grains of HS-6 with mixed brass, Winchester Small Pistol Primers and Hornady's 124 grain XTP bullets seated to 1.06"
Issues: In my Glock 34 Gen 3 the slide is not locking back and I've had several failure to feeds. I've been using a Magentospeed Chrono and with 5.1 I was averaging 995 fps with a standard deviation of 22 fps. The same rounds (less tested) cycled fine in my Glock 43. Winchester white box is about .10" longer then I am seating (and not hollow points) which cycles fine. With 5.4 grains being in the middle of the of the pack would you abandon this particular load? I only have 300 rounds left of it and just picked up 3,000 rounds of 115 grain round nose by Hornady.