I need source for 314 bullets.

Status
Not open for further replies.
D

Dave B

Member
Joined
Jun 26, 2007
Messages
141
Where can I get 314 lead bullets with rnd or rf noses that will feed in a Marlin 94?
 
I haven't run across to many .314 dia lead bullets about the most variety I have seen are on the link below,I'm sure there are more. Scroll down on the left to the 303 British and select the dia. under your preferred weight if this is what you need. What caliber of rifle are you using and have you slugged the bore to make sure its the proper size you need. You only need a bullet about two thousands over the bore dia. ie bore .308 bullet .310

http://www.beartoothbullets.com/bulletselect/index.htm
 
Sorry, I should have said it's for 32 HR mag. I'll check Beartooth out. Thanks
 
Will .32 caliber pistol bullets work? They should cast at about .312" or .313", and if you get lucky they will be oversized a little. If not, you can shim the mold to get another thousandth or two. (the bullets will round back out when you size them.)

If I recall correctly, search the cast bullet forum for "beagling"
 
In that case try these out I sure you can use .312 or .313 with no problems. These guys are pretty up on cast bullet loads and can probably help you with the best weight and loads for that particular rifle and round they have a lever gun section on there. http://castboolits.gunloads.com/


http://www.meisterbullets.com/asccustompages/products.asp?cartID=&affID=&categoryid=22&navParent=0

http://www.berrysmfg.com/categories/37-0.php

http://www.laser-cast.com/32Cal.html

Might find this and uninteresting read
http://www.castbulletassoc.org/forum/view_topic.php?id=2037&forum_id=58&jump_to=13550
 
Status
Not open for further replies.
Back
Top