Ideal Tension in Kydex Holsters?
- Thread starter Bahadur
- Start date
- Status
BerettaNut92
Member
- Joined
- Dec 23, 2002
- Messages
- 9,723
I bounce it lightly upsidedown and if it's secure, it's good enough for me.
Chris Rhines
Member
I put my holster on, make quadruple-sure my pistol is unloaded, and stuff it in the holster. I do a couple of practice draws to make sure I can get to the pistol fast. Then I go do cartwheels and sommersaults in the backyard. If the gun doesn't come loose, then I'm happy. 
- Chris
- Chris
How would you quantify "lightly"? I'd imagine that - without an active retention mechanism of some kind - there would be a point beyond which the inertial force from shaking or bouncing would produce a drop. I guess I am asking what folks think is the best compromise between retention and speed with Kydex holsters.
Two things:
1. Do you at least load the magazines to simulate the weight of a loaded gun?
2. How do you account for the fact that with some autoloading pistols with chamber indicators/extractors, the fit of the holster is different when the chamber is loaded? This produces - in my experience - a very different level of retention compared when the chamber is empty.
My thanks to those who responded!
tiberius
Member
1. yes, for the "skunk test" - a good one iMHO.
2. Wow - If you find a difference then all you have to do is use a spent case or snap cap in the chamber. My only kydex is for a 1911 and revolver, so I never experienced this problem/issue.
2. Wow - If you find a difference then all you have to do is use a spent case or snap cap in the chamber. My only kydex is for a 1911 and revolver, so I never experienced this problem/issue.
Chris Rhines
Member
Good questions.
- Chris
Sort of. Fifteen 9mm dummy rounds in the magazine, so I'm losing the weight of the powder and primers. This doesn't concern me too much.
I only use Kydex holsters, and none of mine cover the extractor. None of my pistols have loaded-chamber indicators.
- Chris
Does anyone else (one who has Kydex holsters that cover the extractor and/or pistols with chamber-loaded indicator) have a comment?
And another question remains: just how hard should one shake the holster upside down to test the retention level? I found that I could make a Kydex holster completely drop-proof in this fashion (the gun would not fall out no matter how hard I shoo), but then the gun would not draw smoothly or easily.
Conversely, when I set the tension just "so" that the gun drew easily and smoothly, the retention level was such that a good ooomph of a bounce when upside down made the gun drop out.
What is a good balance between the two? How does one test for that fine balance?
Chris Rhines
Member
My advice - get some dummy rounds (Brownells sells them,) load a magazine with them, chamber a round, then do the cartwheel thing.
- Chris
- Chris
QuarterBoreGunner
Member
"...and first up for the American Olympic Armed Gymnastic Team is Chris Rhines."
10-Ring
Member
It might also depend if you've got a holster w/ a thumb break or not. Me, I keep it just tight enough to keep my gun from moving around but not fight me when it's time to draw...I like Skunk's "light" bounce test too tho!
test too tho!BerettaNut92
Member
- Joined
- Dec 23, 2002
- Messages
- 9,723
Sweet! I finally get a gun move named after me
Doesn't sound nearly as cool as the 'Hackathorn Rip' or the 'Tueller Drill' though
Doesn't sound nearly as cool as the 'Hackathorn Rip' or the 'Tueller Drill' though
If the gun falls out doing the Skunky test, then it's too loose.
If it gives you an atomic wedgie when trying to draw, and when you present the gun you notice that it's still in the holster with your belt dangling from it, it's too tight.
If it gives you an atomic wedgie when trying to draw, and when you present the gun you notice that it's still in the holster with your belt dangling from it, it's too tight.
- Status
