Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

illustrated Kel-Tec P-11/P-40 and P-32 dis/re-assembly and mods

Discussion in 'Gunsmithing and Repairs' started by yzguy, Jan 24, 2003.

Thread Status:
Not open for further replies.
  1. yzguy

    yzguy Member

    Joined:
    Dec 27, 2002
    Messages:
    589
    Location:
    Fl
    http://www.1bad69.com/keltec/index.htm
    links at the top of this page include:

    for the P-32 and P-11/P-40:
    My Assembly Pin mods
    info on the metal vs plastic guide rod
    info on helping to diagnose/fix a premature slide lock problem
    field striping instructions
    complete dis/re-assembly instructions

    for the P-32:
    Rim lock explanation
    Trigger shoe

    for the P-11/P-40:
    removing a plastic guide rod that has slipped back to far during assembly
    a way to use a S&W 12 round mag and have it shorter than the stock mag plus a finger extension
    trigger smoothing
    shortening the trigger travel
    moving the trigger reward in the trigger guard
    lightening the trigger pull
    shortening the firing pin spring
    pretravel stop
    over travel stop
     
  2. Ledbetter

    Ledbetter Member

    Joined:
    Dec 24, 2002
    Messages:
    621
    Location:
    Carpinteria, California
    Wow. Thanks for the good info.
     
Thread Status:
Not open for further replies.

Share This Page