Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

info. needed for n350 load for 45 200 lswc..

Discussion in 'Handloading and Reloading' started by als 1911, May 26, 2013.

Thread Status:
Not open for further replies.
  1. als 1911

    als 1911 Member

    Joined:
    Mar 25, 2013
    Messages:
    8
    Try to find data at lupau site and nothing for n350 with 200 grn lswc for my 45 ACP..any useful info will be helpful ..thanks
     
  2. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,768
    Location:
    Alabama
    It is a bit slow for that, but you could use the N340 data they show and be safe. It will probably be dirty as well. N320 is a great deal better choice if you have some or can get some.
     
  3. als 1911

    als 1911 Member

    Joined:
    Mar 25, 2013
    Messages:
    8
    Thanks Walkalong
     
  4. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,768
    Location:
    Alabama
    If you want to go real light, N310 is great as well.
     
  5. 7mmb

    7mmb Member

    Joined:
    Apr 18, 2011
    Messages:
    327
    Location:
    Salt Lake City, UT
    You could use their data for the Hornady 200gr FMJ-CT and knock it down by a couple tenths of a grain. N350 is really too slow for 45 Auto. I've had great results with N320 and N340 though. N350 is awesome in 9mm. In fact, I'm going to go load some up right now.
     
  6. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    46,768
    Location:
    Alabama
    N340 and full power 230 Gr jacketed is great stuff, but I have not tried it with downloaded lead.
     
  7. als 1911

    als 1911 Member

    Joined:
    Mar 25, 2013
    Messages:
    8
    7mmb, that's great to hear because I have a 9mm so I'll use the n350 for that and get something else for 45 ....thanks for all the info
     
Thread Status:
Not open for further replies.

Share This Page