intertec?
- Thread starter bigred94
- Start date
- Status
Mooseman
Member
what is the exact model name on the pistol? Would it be possible to post some pictures of it?
never mind, I found it. I suggest looking at the back of the pistol. I haven't seen a picture of one but there's probably a button you can push in to release the slide at the back.
never mind, I found it. I suggest looking at the back of the pistol. I haven't seen a picture of one but there's probably a button you can push in to release the slide at the back.
Last edited:
I assume you mean the Intratec Protec .25. There doesn't seem to be a whole lot of info about this gun, but it seems to be a copy of the CZ-45. Here is a page with some info on the CZ. With the paragraph below about disassembly.
http://unblinkingeye.com/Guns/2CZ25s/2cz25s.html
"Disassembly is similar to the Browning. Remove the magazine and make sure the chamber is empty. Draw the slide back about 1 centimeter and rotate the barrel clockwise a quarter-turn. Remove the barrel and slide forward off the receiver. Other than the guide rod and recoil spring, there are no small parts that come loose."
Hope that helps.
http://unblinkingeye.com/Guns/2CZ25s/2cz25s.html
"Disassembly is similar to the Browning. Remove the magazine and make sure the chamber is empty. Draw the slide back about 1 centimeter and rotate the barrel clockwise a quarter-turn. Remove the barrel and slide forward off the receiver. Other than the guide rod and recoil spring, there are no small parts that come loose."
Hope that helps.
Mooseman
Member
Wow, so much for my guess. Gbelleh, I bow to your superior google skills!
- Status