Is this safe to shoot?

Status
Not open for further replies.
I found a firing pin on eBay for an Iver Johnson that looks just like the firing pin I broke. Would it be wise to buy it?
 
From that date, you also want to verify the chamber length - it might be a 2-1/2"chamber. IF it does, firing a 2-3/4"shell could have undesirable results
 
With a chamber gauge - a gunsmith can tell you in about 3 seconds.

Remember, hull length is the FIRED length, so an unfired 2-3/4" will fit into a 2-1/2"chamber, but firing it could result in severe issues from increased pressures
 
I found a firing pin on Numrich for a Stevens 85 which looks exactly like mine. I'll probably take it to the gunsmith Saturday and hopefully have a good, clean bill of health! :D
 
There's nothing wrong with a good cheap single shot shotgun. I have at least half a dozen in various gauges and doubt that I paid over $75 for any of them. Check the chamber, shoot it, enjoy it.
 
I picked up a no-name single shot 12 at a sale this fall for 60, right after somebody payed 170 for a single shot 20 of no-name. Couldn't believe my eyes.
 
Status
Not open for further replies.
Back
Top