Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Kel-Tec Serial Number

Discussion in 'Handguns: Autoloaders' started by jondar, Dec 7, 2006.

Thread Status:
Not open for further replies.
  1. jondar

    jondar Member

    Joined:
    Jun 10, 2005
    Messages:
    481
    My new Kel-Tec's serial number is A75XX. Can anyone tell me if this is recent manufacture which would indicate whether it has the 8.5 pound trigger spring or not?
     
  2. DirksterG30

    DirksterG30 Member

    Joined:
    Apr 19, 2005
    Messages:
    625
    Location:
    Pittsburgh, PA
  3. alamo

    alamo Member

    Joined:
    Dec 27, 2002
    Messages:
    1,219
    Location:
    austin, texas
    I assume you're talking about a P-11, that number is well past the point where they started using the 8.5 lb. trigger. That started around sn. 26,XXX so they made about 100,000+ pistols with the 8.5 lb. trigger pull since yours was made.
     
  4. jondar

    jondar Member

    Joined:
    Jun 10, 2005
    Messages:
    481
    OK, thanks. That was what I wanted to know. That serial on mine just didn't match up with the ones in some of the postings here where they were in the five and six digit numbers.
     
  5. alamo

    alamo Member

    Joined:
    Dec 27, 2002
    Messages:
    1,219
    Location:
    austin, texas
    Oops, that should be before yours was made. I've got a 76,XXX P-11 that I bought around 2000 so mine has the 8.5 lb. trigger. They switched to alphanumeric serial numbers in early '04 so yours is no doubt fine.
     
Thread Status:
Not open for further replies.

Share This Page