Kimber Pro Carry II wear patterns

Status
Not open for further replies.
Z

zammyman

member
Joined
Nov 2, 2008
Messages
296
Location
Minnesota
Taking apart my Pro carry II after 200 rounds of WWB 230 grain FMJ, I noticed these marks on the left side of the frame rails. It seems like something is rubbing against it to a certain point.. cannot figure out what. Is this something I should be worried about?

kbrr11.jpg


kbrr112.jpg
 
Oh, if it makes a difference, it was properly cleaned and lubed before first firing, oiled with Shooters Choice FP10.
 
There's not really anything contacting the slide rails there other than the slide itself.
 
That's what I thought. What could be causing this? I didn't underlube or overlube the gun, and again it's factory ammo. Anybody have an idea on this? Should I be worried about this?
 
Just checked my pro shadow [same gun different model ] and it to has slighty different rub marks on the frame. I have noticed these before and looks like it is just the slide and frame mating together. Since I first noticed thes marks [ after a few hundred rounds ] they have not changed or increased. Keep the gun properly lubed and you shouln't have any problems.
 
Status
Not open for further replies.
Back
Top