Lee auto disk measure

[jonzzzey02]

Merry Christmas everyone im a newbie to the forum. I have a question about the lee double disk auto measure. My awesome fiance bought me a lee turret press for christmas along with the primer feed, so my question is should i buy the auto disk powder measure or the double disk powder measure? Why would i need the double and which one works best with the turret press? Thanks.

 

[bluetopper]

First of all welcome to the forum.
My first recommendation is to use some other type of powder measure besides the disc type. It will save you a lot of toil, angst, and frustration. Been there and done that. Look at the Lee Auto Drum powder measure.
Wait on other responses besides mine.
Lurk here for a while and use the search feature. There's a wealth of info here.

 

[RandyP]

The double disk setup is used when you need a larger volume charge than you can get from a single disk hole, or a DIY drilled out hole.

Mostly for rifle charges.

I use the Pro Auto-Disk on my Classic turret and it throws a very consistent charge using Win 231/HP-38 (for all pistol calibers) and H335 for my AR.

 

[jonzzzey02]

Would i need a riser for the auto drum powder measure?

 

[RandyP]

Yes on the riser. I recommend the Pro version over the standard disk dispenser.

 

[Gadawg88]

The Lee auto disk works just fine with most powders. But, I would recommend you go with the Lee Auto Drum. I have both and I prefer the auto drum. It is very consistent, doesn't leak at all and you can dial in exactly the charge you want more conveniently than with the disk system. You will need the riser if you are using the safety prime.

 

[RealGun]

I have the three variations of the Lee case-activated powder measure. I like the new one, the Auto-Drum. However, I have pretty well mastered the older design, including the double disk, used just recently to yield 19 grains of 2400. Since the older one is significantly less expensive, I would still pick it, if I was going to have a dedicated powder measure on each cartridge turret setup, something that is realistic, given Lee pricing. To start though, I would encourage you to get the Auto Drum.

 

[Elkins45]

The auto drum is a great improvement over the auto disk in my opinion, and the small price difference will be forgotten in minutes.

 

[RealGun]

Going by list price, the Auto Drum is 25% higher than the Auto Disk measure. Since I have (10) of them, I might care about the difference ($90).

Note that you need to buy extra drums to capture powder drop settings. That is certainly not the same thing as just making note of which disks or cc volume you used or which micrometer setting on an adjustable charge bar will put you close the next time.

 

[Rule3]

At Titan reloading the Lee Pro auto disc is $37 the new Auto Drum is $36

it comes with 2 drums so you have infinite control of the powder not what the disc gives you. For $15 you can get 4 more drums to leave pre set to what ever powder charge you want. for a total of 6 drums.

I have used the PRO auto disc for years, I have switched over to the drum and like it a lot. For the price it is a no brainer. I have the mini discs, double discs and charge bar, the drum makes them all obsolete.

 

[jonzzzey02]

Thanks guys for the great info. Im probably going to buy the auto drum.

 

[Reefinmike]

The autodisk is a great measure- specifically the PRO autodisk. The double disk($6 add on kit) is only needed for large charges- mainly rifle. Yes on the riser.

I would get the new auto drum measure if i were you. Much more control over charge weights. Ill stick with my autodisk measures for now as i dont see a need to hit any of those charge weights that the autodisk set misses. The adjustable charge bar and my stand alone lee perfect powder measure will take care of any of those odd powder weights should i find the need.

 

[tcoz]

I think the Lee Turret Press is one of the best values in reloading but after using the Pro Auto Disk for three years I'd say it's the one piece of Lee reloading gear that leaves something to be desired. Usually and with most powders it would throw consistent charges but suddenly at times and for no discernible reason it would become very inconsistent. For this reason I wound up weighing most of my charges anyway. It's also very friendly to some powders and not so friendly to others.
For these reasons and because I got tired of fiddling around with the disks when working up loads, I finally broke down and bought a Chargemaster. Best reloading decision I ever made.

 

[rondog]

I've been happy with my Auto Disk for years, but investigate this Auto Drum, I must.....

 

[RealGun]

Of my (10) Auto Disk measures, only one has a PRO upgrade kit. The old style is cheaper and works great for me. I use the double disk regularly for 41 and 44 mag and for Tier II 45 Colt. When using that much powder, a tenth of a grain plus or minus is not very significant, so the standard set of disk holes work fine for me and my paper shooting.

 

[drband]

Buy the AutoDrum you must. Sorry you will not be!

 

[wizard1911]

If you're only doing pistol calibers, take a look at the adjustable charge bar. Works well and is cheap.

 

[berettaprofessor]

Have been happy with my Pro Auto Disk, but like others, I guess I'll take a look at the Auto Drum.

 

[clutch]

Is any one using an autodrum for titegroup and .380? My smallest autodisk cavity is too big. I'm using a loadmaster for a press.