Lee Case Feed add on

[WaynePatrick]

Is anyone using the Lee case feed add on with a progressive press?
I just bought an RCBS Pro 5. I want to feed cases but I don't want the noise or expense of a powered system. Replies appreciated.
Thanks

 

[TheGerman]

The LEE case feeder is not producing any less noise - you dump the cases in the collator at the top and then start shaking the whole thing so the cases fall into the tubes (really noisy...). There are several tubes, but you need to manually monitor fill level and advance to the next tube when needed. It only works on the LEE progressive and I doubt that it could be easily modified for a different press.

 

[RealGun]

I use the Bully Adapter on my Hornady LnL AP. It relies on the tube set from the Lee case feeder. There are separate Bully adapters for the Hornady die versus the superior Mr Bullet Feeder die. You will have to decide what to give up, when taking a station for the bullet feeder. I combine seat and crimp and keep the powder check, since the bullet feeder interferes with viewing the powder charge.

 

[WaynePatrick]

I bought the RCBS case feeder and bullet feeder. They’re offering a healthy rebate right now so I took advantage of the savings and bought what I really wanted.